Maintenance of our 50 kW generator and fixing sealing.
In February 2006 we replaced the cylinder head gasket of the 50 KW generator:
The photographs above are clickable for enlarged vision.
The cylinder head gasket sealed insufficient causing cooling water to leak and freezing the machine.
The cylinder head, rockers, exhaust, fuel, and air-supply were loosened.
The cylinder head was cleaned and made flat after that, a new gasket was fitted.
After solving an issue with the fuel pump, the cylinders head nut were tightened to a torque of 600N/m and the machine worked just fine.
The work done with our own people and resources.